MSTDECEN=DISABLED, TOERRIEN=DISABLED, DSTMOD=DTMNDST0, PRISTIEN=DISABLED, SECSTIEN=DISABLED, SRCMOD=DTMNSRC0, DTMCHSEL=CH_A, INHSPOL=ACTIVE_LOW, DTMINH=INACTIVE
Active DTM State
| STRELOAD | Active State Counter Reload. |
| SECST | Secondary State. |
| PRIST | Primary State. |
| DSTMOD | Destination Module. 0 (DTMNDST0): Select destination module DTMnDST.0. 1 (DTMNDST1): Select destination module DTMnDST.1. 2 (DTMNDST2): Select destination module DTMnDST.2. 3 (DTMNDST3): Select destination module DTMnDST.3. 4 (DTMNDST4): Select destination module DTMnDST.4. 5 (DTMNDST5): Select destination module DTMnDST.5. 6 (DTMNDST6): Select destination module DTMnDST.6. 7 (DTMNDST7): Select destination module DTMnDST.7. 8 (DTMNDST8): Select destination module DTMnDST.8. 9 (DTMNDST9): Select destination module DTMnDST.9. 10 (DTMNDST10): Select destination module DTMnDST.10. 11 (DTMNDST11): Select destination module DTMnDST.11. 12 (DTMNDST12): Select destination module DTMnDST.12. 13 (DTMNDST13): Select destination module DTMnDST.13. 14 (DTMNDST14): Select destination module DTMnDST.14. 15 (DTMNDST15): Select no destination module (DTMnDST.15). |
| SRCMOD | Source Module. 0 (DTMNSRC0): Select source module DTMnSRC.0. 1 (DTMNSRC1): Select source module DTMnSRC.1. 2 (DTMNSRC2): Select source module DTMnSRC.2. 3 (DTMNSRC3): Select source module DTMnSRC.3. 4 (DTMNSRC4): Select source module DTMnSRC.4. 5 (DTMNSRC5): Select source module DTMnSRC.5. 6 (DTMNSRC6): Select source module DTMnSRC.6. 7 (DTMNSRC7): Select source module DTMnSRC.7. 8 (DTMNSRC8): Select source module DTMnSRC.8. 9 (DTMNSRC9): Select source module DTMnSRC.9. 10 (DTMNSRC10): Select source module DTMnSRC.10. 11 (DTMNSRC11): Select source module DTMnSRC.11. 12 (DTMNSRC12): Select source module DTMnSRC.12. 13 (DTMNSRC13): Select source module DTMnSRC.13. 14 (DTMNSRC14): Select source module DTMnSRC.14. 15 (DTMNSRC15): Select no source module (DTMnSRC.15). |
| DTMCHSEL | DTM Channel Select. 0 (CH_A): Select DTMn channel A for this state. 1 (CH_B): Select DTMn channel B for this state. 2 (CH_C): Select DTMn channel C for this state. 3 (CH_D): Select DTMn channel D for this state. |
| INHSPOL | Inhibit Signal Polarity. 0 (ACTIVE_LOW): A logic low on the pin selected by INHSEL will allow the DTM to proceed. 1 (ACTIVE_HIGH): A logic high on the pin selected by INHSEL will allow the DTM to proceed. |
| DTMINH | Module Inhibit Enable. 0 (INACTIVE): The DTM module does not ignore any DMA requests. 1 (ACTIVE): The DTM module ignores all DMA requests until the inhibit signal selected by INHSSEL matches the polarity polarity set by INHSPOL. |
| MSTDECEN | Master Decrement Enable. 0 (DISABLED): Disable master counter decrements. 1 (ENABLED): Enable master counter decrements. |
| TOERRIEN | Timeout Enable. 0 (DISABLED): Disable timeouts and timeout interrupts. 1 (ENABLED): Enable timeouts and timeout interrupts. |
| SECSTIEN | Secondary State Transition Interrupt Enable. 0 (DISABLED): Disable secondary state transition interrupts. 1 (ENABLED): Enable secondary state transition interrupts. |
| PRISTIEN | Primary State Transition Interrupt Enable. 0 (DISABLED): Disable primary state transition interrupts. 1 (ENABLED): Enable primary state transition interrupts. |